Impact windows and doors are built for hurricanes, but day to day it's salt, sand and sun that wear them down. A little regular care keeps sliders rolling, locks engaging and seals doing their job, and many manufacturers require documented maintenance to keep warranties valid.
Rinse the salt off
On the water, salt builds up on frames, glass and hardware. Rinsing with fresh water every few weeks, and after storms, is the single most useful thing you can do. Use mild soap and a soft cloth, and avoid abrasive pads or harsh chemicals that can damage coatings and finishes.
Keep tracks and weep holes clear
Sand and debris in sliding door tracks make panels hard to move and wear out rollers. Vacuum and wipe tracks regularly, and make sure the small weep holes at the bottom of frames are clear so water can drain out as designed.
Look after the hardware
Locks, handles, hinges and rollers need occasional lubrication with a product the manufacturer recommends. If a lock doesn't engage smoothly or a slider starts to drag, have it adjusted early. Forcing it usually turns a small adjustment into a replacement part.
Check seals and weatherstripping
Inspect gaskets and weatherstripping for cracks, gaps or shrinkage, especially on elevations that take direct sun. Damaged seals let in water and air and should be replaced before the rainy season.
Keep a record
Note when maintenance was done and by whom. If you ever need a warranty claim, that record matters.
When to call us
Our owner service packages include scheduled maintenance visits, hardware adjustment, seal and weatherstrip inspection and records for your warranty file, and we're a call or text away when something needs attention.